安装显卡驱动出现问题？请教！

现在刷新率是61hz，能否说的详细一点呢，我是刚刚开始学的？先谢谢了！
只是安贴子里在字符界面下不仍这行?太菜了

在安装过程中出现以下信息：
No matching precompiled Kernel interface was found on the NVIDIA
不过最后还有安装进度条出现，完成后，就不能进入X桌面了。
执行:startx时出现以下错误信息：
XIO: fatal IO error 104 (connection reset by peer) on X server ":0.0"
after o request (o Known processed) with o events remaining
现在应该怎么办？(系统是slk 10 ,NVIDIA GF2 100/200)

自从前天装上了slk，好象就没有睡好觉，看折磨人呀，不过也从这边学了不少东西，心里又觉得高兴！

上面的问题如何解决呢,急呀

帮帮我吧？
刚刚去下载了一个新的驱动，不知行不行？

你的显卡是什么型号的？有时候重新编译一下显卡驱动，再用xorgsetup配置一下就好了，在gnome里面就可以改了。

有没有修改/etc/X11/xorg.conf?

Slackware 10 里
配置 X 命令

xorgcfg -textmode

我都没有配置你们所说的文件？
我的显卡是NVIDIA GeForce MX 2 100/200(好象是昂达的)
只是安装显卡驱动时出现以下提示信息：
No precompilced kernel interface was found to match your kernel:
然后又问要不要到网站上去找，但是又找不到相应的驱动。

这时你应该回答No，然后它就会根据你的内核编译一个驱动,前提是安装了kernel-headers和kernel-source这两个包。

支持

按楼上所说，重新进行安装（系统也重装了-完全安装），选择NO后有安装进度条直至完成。接着出现了以下信息：
please update your XF86config file as appropriate
这是要配置xorg.conf文件吧，但是我用xorgsetup进行配置时，好象一按ok就很快退出程序了。进入gnome还是不能进行刷新率的调整。

打开xorg.conf, 找到：
Driver "vesa"

改成：
Driver "nvidia"

按楼上的方法改后，现在X windows不能进了，提示xorg.conf配置有错

改回vesa能进吗？
有没有退出原来的X?

Below from NVIDIA Driver Readme:
If you already have an X config file working with a different driver
(such as the 'nv' or 'vesa' driver), then all you need to do is find
the relevant Device section and replace the line:

Driver "nv"
(or Driver "vesa")

with

Driver "nvidia"

In the Module section, make sure you have:

Load "glx"

You should also remove the following lines:

Load "dri"
Load "GLcore"

if they exist. There are also numerous options that can be added to the
X config file to fine-tune the NVIDIA X driver. Please see Appendix D
for a complete list of these options.

Once you have configured your X config file, you are ready to restart X
and begin using the accelerated OpenGL libraries. After you restart X,
you should be able to run any OpenGL application and it will automatically
use the new NVIDIA libraries. If you encounter any problems, please
see the FREQUENTLY ASKED QUESTIONS section below.

我原来是设成直接进入gnome的，现在不能进入以后，会死在哪儿，不能进入字符界面了，现在不知如何办了？感谢楼上的回答，还有就是后面一些洋文看不太懂了？

打开xorg.conf, 找到：
Driver "vesa"

改成：
Driver "nvidia"

找到：
Load "glx"

找不到就加上那一行

如果找到：
Load "dri"
Load "GLcore"

就注释掉

这是我的xorg.conf:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "record"
Load "extmod"
Load "dbe"
#Load "dri"
Load "xtrap"
Load "glx"
Load "freetype"
Load "type1"
Load "freetype"
Load "speedo"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
#Option "XvMCUsesTextures" # [<bool>]
#Option "HorizSync" # <str>
#Option "VertRefresh" # <str>
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV11DDR [GeForce2 MX 100 DDR/200 DDR]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

烦请看下，感激不尽！

已经好了，在些非常感谢frenzy及其它给我帮助的人，要不然我都要快要疯了，再次感谢！

如何好的？

就是依照你的办法，先到nvidia网站上下载了一个最新的驱动，安装时选NO，然后执行xorgsetup进行配置，进入Xwindows后，不能进行调整，后把load dri注释掉重新进入就可以进行刷新率的调整了，对不起上面的xorg.conf是好的。

Great!