【转贴】Sun ALOM, ILOM, ELOM and v20z/v40z的串口访问方式汇总

http://www.prasannatech.net/2010 ... alom-elom-ipmi.html

In this post, we will see the commands for accessing the serial console of different kinds of Sun servers based on ALOM, ILOM, ELOM and other IPMI based Service Processors like V20z/V40z.

1. Accessing Serial console of ALOM systems
2. Accessing Serial console of ILOM systems
3. Accessing Serial console of ELOM systems
4. Accessing Serial console of V20z/V40z IPMI based Service Processors

1. Accessing Serial console of ALOM systems (like Sun Fire V125, V210, V240, V245, V250, V440, V445, Netra 210, 240, 440)

1.1 Logon to the SC.

1.2 Use console command for serial console access or console -f to force writing if the console is in read-only mode.

Example:

v125-sp> console
Console session already in use. [view mode]
Enter #. to return to ALOM.
(Press #.)

v125-sp> console -f
Warning: User currently has write permission to this console and forcibly removing them will terminate any current write actions and all work will be lost. Would
you like to continue? [y/n]y
Enter #. to return to ALOM.
(Press Enter key to view serial console)

Note: To exit the serial console, press #. (# followed by .)

2. Accessing Serial console of ILOM systems (like Sun Fire X4100, X4100 M2, X4140, X4150, X4170, X4200, X4200 M2, X4250, X4270, X4600, X4600 M2, etc)

2.1 Logon to the SP.

2.2 Use start /SP/console command for serial console access, if the serial console is in use, use stop /SP/console followed by start /SP/console command.

Example:

-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console is in use.

-> stop /SP/console
Are you sure you want to stop /SP/console (y/n)? y

-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y

Serial console started. To stop, type ESC (
(Press Enter key to view serial console)

Note: To exit the serial console, press ESC ( OR ESC followed by Shift-9

3. Accessing Serial console of ELOM systems (specific ones like Sun Fire X2100, X2100 M2, X2200, X2200 M2)

3.1 Logon to the SP.

3.2 Use start /SP/AgentInfo/console command for serial console access, if the serial console is in use, then use stop /SP/AgentInfo/console followed by start /SP/AgentInfo/console command.

Example:

/SP -> start /SP/AgentInfo/console
console already active on another session
/SP -> stop /SP/AgentInfo/console
console de-activate successful
/SP -> start /SP/AgentInfo/console
console activate successful
press ESC ( to terminate session...

Note: To exit the serial console, press ESC ( or ESC followed by Shift-9

4. Accessing Serial console of V20z/V40z IPMI based Service Processors

4.1 Logon to the SP.

4.2 Use platform console command for serial console access, if the serial console is in use, then use ^Ec. to force writing into the console.

Example:

localhost $ platform console
[Enter `^Ec?' for help]
[no, [email protected] is attached]
(Press ^Ecf)
[bumped [email protected]]
(Press Enter key to view serial console)

Note: To exit the serial console, press ^Ec. (Ctrl-E followed by c followed by .)

纯属转贴。

强贴，设精