装了vmware2不能上网了！！！！help me!

系统启动时：

local package initialization :rtc/dev/vmmon:module vmon:registered whith major=200minor=0 tag=$name:build-570 $

/dev/vmmon:moduld vmmon:initialized
ngctl:send msg:network is down
vmet1romiscuous mode enabel
高亮显示红色的字符。

运行#vmware
输出以下的： ************************************************************
It seems Linux procfs is not mounted on /compat/linux/proc.
VMware does not work without Linux procfs mounted.

For details, see linprocfs(5) manpage.
************************************************************
这是当时的ifconfig的输出。
# ifconfig
sis0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:40:26:f3:b4:98
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
vmnet1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::2bd:43ff:fe01:1%vmnet1 prefixlen 64 scopeid 0x6
ether 00:bd:43:01:00:01
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
Opened by PID 281

网卡能认出，用sis0在别的系统能上网。我已编译过内核，平时就只有sis0,lo0,tun0
但不知道怎么的，我启动时按空格，输入boot -s ,再启动，就能上网了？？？？
#dmesg|grep ker
Preloaded elf kernel "kernel" at 0xc051d000.
这是什么内核？难到是最新的，奇怪:ask

原来是/dev/vmmon没有挂载。现在挂载上就启动程序了。就是不懂怎么用ISO文件安装系统？