装了FreeBSD测不到声卡~~~~~

在unix下怎样装声卡驱动??那里有公共的声卡驱动

dmesg 贴来看看!

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
[email protected]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c02000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c02244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0c022f0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c0239c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1699.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 268369920 (255 MB)
avail memory = 246853632 (235 MB)
ACPI APIC Table: <AMIINT VIA_P6 >
ioapic0 <Version 0.3> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_P6 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f7a20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
nvidia0: <GeForce2 MX/MX 400> mem 0xd0000000-0xd7ffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci1
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xdfffff00-0xdfffffff irq 18 at device 10.0 on pci0
rl0: Ethernet address: 00:e0:4c:62:f8:54
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 13.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Primax Electronics USB Mouse, rev 1.10/1.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1699817064 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
GEOM: create disk ad0 dp=0xc3174d60
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA133
GEOM: create disk ad1 dp=0xc3174a60
ad1: 19092MB <Maxtor 2B020H1> [38792/16/63] at ata0-slave UDMA100
acd0: CDROM <SONY CD-ROM CDU5221> at ata1-master PIO4
acd1: CDRW <ASUS CRW-5232AS> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s3a

不知你声卡是什么型号, 主板是什么型号?
http://people.freebsdchina.org/kinki/14.htm

声卡是creactive es1371
主板是硕泰克的85erv
http://210.192.99.106/product/mainboard/85erv.htm
我没有用主板那些块AC97声卡

到 /boot/default/loader 把相应的声卡模块 加入就可以了

当然也可以从新编译内核 把声卡编译进去 请参考 handbook得关于声卡的一章

怎么才知道那块是我的声卡模块啊?

可以参考一下 handbook ，，看一下你的 声卡是什么类型的

如果你实在不能确定，，那么你就全部加载 就可以了