[求助]安装Nvidia显卡失败之后，FC6每次启动都需要选择错误提示对话框才能进入Xwindows

问题：
单系统FC6，直接启动后刚开始出现进度条（DNA双螺旋背景），进度条到了最后画面一闪，就出现蓝底白字，问按Yes or No.顺序如下

1)Failed to start X server. It is likely that it is not set up correctly,would you like to view the x serve output to diagnose the problem? 我选择Y

2)X windows Systerm Version 7.1.1 ... please visit /var/log/Xorg.0.log
选择OK

3)Would you like to view the detailed X server output as well? 选择Y

4)回到2),继续按OK

5)Would you like to try to configure the X server? Note that you will need the root password for this. 继续选择Y

6)Please type in the root password:输入完毕之后

7) ..Couldn't start X on Card 0
can't start x serve with old config, trying with a fresh configuration.

8)然后出现图形的显示器配置对话框，简单设置一下分辨率，按确定

9)Display setting changed, ... /etc/X11/xorg.conf...

10)然后顺利进入Xwindows，使用正常，但每次开机都需要这样循环一次。



起因经过:
1)我想升级显卡驱动，去Nvidia主页下载了NVIDIA-Linux-x86-1.0-9629-pkg1.run
，直接在xwindows下#sh NVIDIA-Linux-x86-1.0-9629-pkg1.run，安装失败。

2)后来将/etc/inittab修改id:3，进入text模式，安装同样失败。

3)设置为启动直接进入text模式时，若编辑/etc/X11/xorg.conf，讲其中一句Driver "nvidia"改为"nv"，则用命令startx能正常启动xwindows。但是若事先不做修改，则不行。

4)后来试着卸载NVIDIA-Linux-x86-1.0-9629-pkg1.run
,用命令#./NVIDIA-Linux-x86-1.0-9629-pkg1.run --uninstall重启问题没有改变

5)重装NVIDIA-Linux-x86-1.0-9629-pkg1.run，但是采用如下步骤(参考http://www.isspy.com/article.asp?id=132)：
#chmod +x NVIDIA-Linux-x86-1.0-9629-pkg1.run
#./NVIDIA-Linux-x86-1.0-9629-pkg1.run --extra -only

然后修改一个头文件(不需要修改)
# cd NVIDIA-Linux-x86-1.0-9626-pkg1/usr/src/nv
修改nv-linux.h将#include linux/config.h
改为# include linux/autoconf.h

然后切换到NVIDIA-Linux-x86-1.0-9626-pkg1目录下执行
# ./nvidia-installer

同样和前面提示说安装失败。

于是进入NVIDIA-Linux-x86-1.0-9629-pkg1目录然后执行卸载
#nvidia-installer --uninstall
卸载成功，但是每次开机还是无法直接进入Xwindows.



一些配置参数和log记录:

$ cat /etc/X11/xorg.conf
# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nv"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection



$cat /var/log/Xorg.0.log

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.9-34.ELsmp i686 Red Hat, Inc.
Current Operating System: Linux localhost.localdomain 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:37:32 EDT 2006 i686
Build Date: 04 October 2006
Build ID: xorg-x11-server 1.1.1-47.fc6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 29 01:27:17 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Videocard0"
(WW) No monitor specified for screen "Screen0".
Using a default monitor configuration.
(**) |-->Input Device "Keyboard0"
(==) |-->Input Device "<default pointer>"
(WW) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
unix/:7100,
built-ins
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0686 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 0c,05,00 hdr 00
(II) PCI: 00:0b:0: chip 125d,2838 card 125d,2838 rev 01 class 07,80,00 hdr 00
(II) PCI: 00:0d:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0e:0: chip 1274,1371 card 1274,1371 rev 07 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 1458,0622 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdde00000 - 0xdfefffff (0x2100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd9c00000 - 0xddcfffff (0x4100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] rev 21, Mem @ 0xde000000/24, 0xda000000/25, BIOS @ 0xdfef0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[b]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[2] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[b](B)
[3] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b](B)
[4] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
[5] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[b]
[6] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[7] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[b]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[2] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[b](B)
[3] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b](B)
[4] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
[5] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[b]
[6] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[7] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[b]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[b](B)
[7] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b](B)
[8] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[11] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[b]
[12] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[13] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset RIVA TNT2 Model 64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[b]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[b](B)
[7] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b](B)
[8] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[11] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[b]
[12] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[13] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[b]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[b](B)
[7] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b](B)
[8] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "RIVA TNT2 Model 64"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xDA000000
(--) NV(0): MMIO registers at 0xDE000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM Model: 124 Serial#: 1296707895
(II) NV(0): Year: 2006 Week: 27
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite
(II) NV(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600
(II) NV(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NV(0): Monitor name: SyncMaster
(II) NV(0): Serial No: HVEL716864
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff004c2d240137314a4d
(II) NV(0): 1b1001036c221b782aaaa5a654549926
(II) NV(0): 145054bfef808180714f010101010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300520e1100001e000000fd00384b1e
(II) NV(0): 510e000a202020202020000000fc0053
(II) NV(0): 796e634d61737465720a2020000000ff
(II) NV(0): 004856454c3731363836340a20200023
(II) NV(0): Using CRT on CRTC 0
(II) NV(0): Using EDID range info for horizontal sync
(II) NV(0): Using EDID range info for vertical refresh
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(II) NV(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(II) NV(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync
(II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(II) NV(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
(II) NV(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): <default monitor>: Using hsync range of 30.00-81.00 kHz
(II) NV(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (mode clock too high)
(II) NV(0): Not using default mode "1600x1200" (mode clock too high)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NV(0): Not using default mode "576x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x720" (vrefresh out of range)
(II) NV(0): Not using default mode "640x360" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x800" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x768" (vrefresh out of range)
(II) NV(0): Not using default mode "640x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1400x1050" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (mode clock too high)
(II) NV(0): Not using default mode "1680x1050" (mode clock too high)
(II) NV(0): Not using default mode "1680x1050" (hsync out of range)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (hsync out of range)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1920x1080" (mode clock too high)
(II) NV(0): Not using default mode "1920x1080" (mode clock too high)
(II) NV(0): Not using default mode "1920x1080" (hsync out of range)
(II) NV(0): Not using default mode "960x540" (hsync out of range)
(II) NV(0): Not using default mode "1920x1080" (hsync out of range)
(II) NV(0): Not using default mode "960x540" (hsync out of range)
(II) NV(0): Not using default mode "1920x1200" (mode clock too high)
(II) NV(0): Not using default mode "1920x1200" (hsync out of range)
(II) NV(0): Not using default mode "960x600" (hsync out of range)
(II) NV(0): Not using default mode "1920x1200" (hsync out of range)
(II) NV(0): Not using default mode "960x600" (hsync out of range)
(II) NV(0): Not using default mode "1920x1200" (hsync out of range)
(II) NV(0): Not using default mode "960x600" (hsync out of range)
(II) NV(0): Not using default mode "1920x1200" (hsync out of range)
(II) NV(0): Not using default mode "960x600" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1280x800" (hsync out of range)
(II) NV(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1280x800" (hsync out of range)
(II) NV(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1280x800" (hsync out of range)
(II) NV(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1280x800" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "1440x900" (width too large for virtual size)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) NV(0): *Default mode "1280x800": 107.2 MHz, 62.6 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x800" 107.21 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
(**) NV(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) NV(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) NV(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) NV(0): Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): Driver mode "1280x1024": 109.0 MHz, 63.7 kHz, 59.9 Hz
(II) NV(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
(**) NV(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): Default mode "1280x800": 98.9 MHz, 58.3 kHz, 70.0 Hz
(II) NV(0): Modeline "1280x800" 98.89 1280 1352 1488 1696 800 801 804 833 -hsync +vsync
(**) NV(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
(**) NV(0): Driver mode "1152x864": 104.0 MHz, 67.7 kHz, 74.8 Hz
(II) NV(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync
(**) NV(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) NV(0): Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864" 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync
(**) NV(0): Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) NV(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync
(**) NV(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
(**) NV(0): Default mode "1280x768": 103.0 MHz, 60.2 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x768" 102.98 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
(**) NV(0): Default mode "1280x768": 95.0 MHz, 56.0 kHz, 70.0 Hz
(II) NV(0): Modeline "1280x768" 94.98 1280 1352 1488 1696 768 769 772 800 -hsync +vsync
(**) NV(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
(**) NV(0): Default mode "1280x720": 95.7 MHz, 56.4 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x720" 95.65 1280 1352 1488 1696 720 721 724 752 -hsync +vsync
(**) NV(0): Default mode "1280x720": 89.0 MHz, 52.5 kHz, 70.0 Hz
(II) NV(0): Modeline "1280x720" 89.04 1280 1352 1488 1696 720 721 724 750 -hsync +vsync
(**) NV(0): Default mode "1280x720": 74.5 MHz, 44.8 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
(**) NV(0): Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "960x600": 96.6 MHz, 74.5 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "960x600" 96.58 960 1024 1128 1296 600 600 602 621 doublescan -hsync +vsync
(**) NV(0): Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) NV(0): Default mode "960x540": 102.1 MHz, 78.8 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "960x540" 102.12 960 1028 1128 1296 540 541 544 563 doublescan -hsync +vsync
(**) NV(0): Default mode "960x540": 86.5 MHz, 67.2 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "960x540" 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync
(**) NV(0): Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) NV(0): Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) NV(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) NV(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) NV(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D)
(II) NV(0): Modeline "840x525" 87.00 840 900 988 1136 525 526 529 548 doublescan -hsync +vsync
(**) NV(0): Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "840x525" 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync
(**) NV(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) NV(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
(**) NV(0): Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "700x525" 72.53 700 748 824 948 525 525 527 546 doublescan -hsync +vsync
(**) NV(0): Default mode "700x525": 75.5 MHz, 77.0 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "700x525" 75.50 700 732 828 980 525 525 527 550 doublescan +hsync +vsync
(**) NV(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) NV(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
(**) NV(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) NV(0): Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) NV(0): Modeline "720x450" 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync
(**) NV(0): Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) NV(0): Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) NV(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync
(**) NV(0): Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) NV(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) NV(0): Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync
(**) NV(0): Default mode "640x400": 53.6 MHz, 62.6 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "640x400" 53.60 640 680 748 856 400 400 402 417 doublescan -hsync +vsync
(**) NV(0): Default mode "640x400": 49.4 MHz, 58.3 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "640x400" 49.45 640 676 744 848 400 400 402 416 doublescan -hsync +vsync
(**) NV(0): Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x400" 41.73 640 672 740 840 400 400 402 414 doublescan -hsync +vsync
(**) NV(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) NV(0): Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432" 52.49 576 612 676 776 432 432 434 451 doublescan -hsync +vsync
(**) NV(0): Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "576x432" 48.38 576 612 672 768 432 432 434 450 doublescan -hsync +vsync
(**) NV(0): Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "576x432" 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync
(**) NV(0): Default mode "640x384": 51.5 MHz, 60.2 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x384" 51.49 640 680 748 856 384 384 386 401 doublescan -hsync +vsync
(**) NV(0): Default mode "640x384": 47.5 MHz, 56.0 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "640x384" 47.49 640 676 744 848 384 384 386 400 doublescan -hsync +vsync
(**) NV(0): Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "640x384" 40.07 640 672 740 840 384 384 386 397 doublescan -hsync +vsync
(**) NV(0): Default mode "640x360": 47.8 MHz, 56.4 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x360" 47.83 640 676 744 848 360 360 362 376 doublescan -hsync +vsync
(**) NV(0): Default mode "640x360": 44.5 MHz, 52.5 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "640x360" 44.52 640 676 744 848 360 360 362 375 doublescan -hsync +vsync
(**) NV(0): Default mode "640x360": 37.2 MHz, 44.8 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x360" 37.24 640 668 736 832 360 360 362 373 doublescan -hsync +vsync
(**) NV(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) NV(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) NV(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) NV(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) NV(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) NV(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) NV(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) NV(0): Display dimensions: (340, 270) mm
(**) NV(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xda000000 - 0xdbffffff (0x2000000) MX[b]
[1] 0 0 0xde000000 - 0xdeffffff (0x1000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[b](B)
[9] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[b](B)
[10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000cc00 - 0x0000cc3f (0x40) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[18] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[19] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) NV(0): Write-combining range (0xda000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded




#uname -a
Linux localhost.localdomain 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:37:32 EDT 2006 i686 i686 i386 GNU/Linux


电脑配置
CPU: Intel Celeron III,Coppermine Lite,Copermine-128,600MHz
主板:Gigabyte GA-6VX7-4X 67MHz
内存: 256M SDRAM + 128M SDRAM
显示器:Samsung, SyncMaster711N
显卡:RIVA TNT2 Modd 64/Modd 64 Pro/NVIDIA Corporation 32M
声卡:Creative Sound Blaster MPU-401，Creative SB PCI128 Sound Card
网卡:Realtek RTL 8139 Fast Ethernet NIC,100Mbps
硬盘:ST380021A (80G,7200RPM,Ultra-ATA/100)
主办芯片组? VIA VT82C694X Apollo Pro133A


many thanks!

哪位大虾路过请指点一下，不胜感激！

附开机的硬件检测
$dmesg | more

Linux version 2.6.18-1.2798.fc6 ([email protected]) (gcc v
ersion 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:37:32 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff8000 (ACPI data)
BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 98288
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 94192 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 AMI ) @ 0x000fc6e0
ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x17ff0000
ACPI: FADT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x17ff0030
ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x5008
Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
Detected 601.392 MHz processor.
Built 1 zonelists. Total pages: 98288
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0130c000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ae000 soft=c078e000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 382504k/393152k available (2138k kernel code, 10020k reserved, 868k data
, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1204.49 BogoMIPS (lpj=2408990)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 0
0000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0800 (from 0a20)
CPU0: Intel Celeron (Coppermine) stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=424 bytes
sizeof(dentry)=148 bytes
sizeof(ext3inode)=600 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1392 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2118k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 5000-50ff claimed by vt82c586 ACPI
PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
PCI quirk: region 0400-040f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: dde00000-dfefffff
PREFETCH window: d9c00000-ddcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1164797751.168:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8BDC589434DBC709
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (15 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: VIA IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
Probing IDE interface ide0...
hda: ST380021A, ATA DISK drive
hdb: ST3802110A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2
hdb: max request size: 512KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66)
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 >
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 386k
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 11, io base 0x0000dc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1164797759.328:2): selinux=0 auid=4294967295
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
5
eth0: RealTek RTL8139 at 0xd8854f00, 00:d0:f8:65:4d:b5, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
parport_pc: VIA parallel port: io=0x378, irq=7
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PC Speaker as /class/input/input2
nvidia: module license 'NVIDIA' taints kernel.
NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
NVRM: supported through the NVIDIA Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 1.0-9629 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ
11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
lp0: using parport0 (interrupt-driven).
lp0: console ready
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.4 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device hdb1): load_system_files(): $LogFile is not clean. Mounti
ng read-only. Mount in Windows.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will b
e case sensitive!
Adding 786424k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:7
86424k
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_rea
chable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xb0
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xb0
NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
NVRM: supported through the NVIDIA Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 1.0-9629 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
NVRM: supported through the NVIDIA Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 1.0-9629 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
NVRM: supported through the NVIDIA Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 1.0-9629 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
NVRM: supported through the NVIDIA Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 1.0-9629 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!

哪位兄弟可否把你在/etc/X11/下的xorg.conf贴一下?
我的xorg.conf和xorg.conf.backup和xorg.conf.backup-nvidia-glx内容全都是一样的（见第一个帖子），所以我想参照一下各位的xorg.conf的文件内容,多谢了!!!