hal可自动挂在U盘， 如何让起自动挂载硬盘的其他分区 桌面KDE4

作者: newsky_   发布时间: 2009-09-19

作者: pxbfeiniao   发布时间: 2009-09-19

作者: newsky_   发布时间: 2009-09-19

作者: Mie   发布时间: 2009-09-19

作者: newsky_   发布时间: 2009-09-19

作者: lophyxp   发布时间: 2009-09-20

作者: newsky_   发布时间: 2009-09-21

作者: lophyxp   发布时间: 2009-09-21

dmesg

引用:

- 000007c96f] #8 [000007d000 - 0000084000] BOOTMAP ==> [000007d000 - 0000084000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x00079c00 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x000796a1 0: 0x000796a7 -> 0x000797b7 0: 0x0007980f -> 0x000798c7 0: 0x00079bff -> 0x00079c00 On node 0 totalpages: 497672 free_area_init_node: node 0, pgdat c151e480, node_mem_map c15b1000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2121 pages used for memmap HighMem zone: 268323 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages at c24f3000, static data 28124 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 493775 Kernel command line: root=/dev/sda9 acpi_sleep=s3_bios,s3_mode acpi_osi="Linux" thinkpad_acpi.fan_control=1 quiet video=uvesafb:1280x800-24@60,ywrap,mtrr:3 ramdisk=2048 splash=silent,fadein,theme:livecd-2007.0 console=tty1 ACPI: Added _OSI(Linux) PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:00079c00) Memory: 1967044k/1994752k available (3787k kernel code, 22836k reserved, 1471k data, 328k init, 1081776k highmem) virtual kernel memory layout: fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1523000 - 0xc1575000 ( 328 kB) .data : 0xc13b2d10 - 0xc1522a78 (1471 kB) .text : 0xc1000000 - 0xc13b2d10 (3787 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 NR_IRQS:320 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2394.220 MHz processor. Console: colour VGA+ 80x25 console [tty1] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.44 BogoMIPS (lpj=2394220) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.17 BogoMIPS (lpj=2393585) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9575.61 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via cmdline ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10 io port: [0x1828-0x182f] pci 0000:00:03.2: reg 14 io port: [0x180c-0x180f] pci 0000:00:03.2: reg 18 io port: [0x1820-0x1827] pci 0000:00:03.2: reg 1c io port: [0x1808-0x180b] pci 0000:00:03.2: reg 20 io port: [0x1810-0x181f] pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837] pci 0000:00:03.3: reg 14 32bit mmio: [0xf2624000-0xf2624fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7bffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11ff has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x167f has been reserved system 00:02: ioport range 0x1680-0x169f has been reserved system 00:02: iomem range 0xe0000000-0xefffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x2000-0x2fff pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000f2900000-0x000000f29fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 1 mem: [0xf2500000-0xf25fffff] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff] pci_bus 0000:05: resource 2 pref mem [0xf2900000-0xf29fffff] pci_bus 0000:0d: resource 3 io: [0x00-0xffff] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 466k freed Simple Boot Flag at 0x35 set to 0x1 microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba highmem bounce pool size: 64 pages NTFS driver 2.1.29 [Flags: R/W]. fuse init (API version 7.12) msgmni has been set to 1731 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.3: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] ACPI: SSDT 798d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 798d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 798d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 798d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (50 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (46 C) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] MTRR allocation failed. Graphics performance may suffer. ACPI: Battery Slot [BAT0] (battery present) [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data [drm] LVDS-8: set mode 1280x800 c Console: switching to colour frame buffer device 160x50 fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0 [drm] fb0: inteldrmfb frame buffer device acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 16 ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 16 ata3: DUMMY ata4: DUMMY e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:16:e9:d3 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels phy0: Selected rate control algorithm 'iwl-agn-rs' ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 Monitor-Mwait will be used to enter C-3 state ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 6DET53WW (3.03 ), EC 7XHT22WW-1.04 thinkpad_acpi: Lenovo ThinkPad X200, model 7458AJ7 thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi:ower Registered led device: tpacpi::standby Registered led device: tpacpi::thinkvantage thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input5 Advanced Linux Sound Architecture Driver Version 1.0.20. HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA device list: #0: HDA Intel at 0xf2620000 irq 17 TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' Using IPI No-Shortcut mode ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: WDC WD2500BEVS-08VAT1, 13.01A13, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-0 13.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 ata2: SATA link down (SStatus 0 SControl 300) EXT2-fs: sda9: couldn't mount because of unsupported optional features (240). EXT4-fs (sda9): barriers enabled kjournald2 starting: pid 819, dev sda9:8, commit interval 5 seconds EXT4-fs (sda9): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda9): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:9. Freeing unused kernel memory: 328k freed usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice input: HID 04b3:3107 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input7 generic-usb 0003:04B3:3107.0001: input: USB HID v11.10 Mouse [HID 04b3:3107] on usb-0000:00:1d.0-1/input0 Clocksource tsc unstable (delta = -414338729 ns) udev: starting version 145 EXT4-fs (sda9): internal journal on sda9:8 EXT4-fs (sda10): barriers enabled kjournald2 starting: pid 1317, dev sda10:8, commit interval 5 seconds EXT4-fs (sda10): internal journal on sda10:8 EXT4-fs (sda10): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda10): mounted filesystem with ordered data mode fbcondecor: console 1 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 1 fbcondecor: console 2 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 2 fbcondecor: console 3 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 3 fbcondecor: console 4 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 4 fbcondecor: console 5 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 5 thinkpad_ec: thinkpad_ec 0.40 loaded. tp_smapi 0.40 loading... tp_smapi successfully loaded (smapi_port=0xb2). hdaps: initial mode latch is 0x05 hdaps: setting ec_rate=250, filter_order=2 hdaps: device successfully initialized. input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input8 input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input9 hdaps: driver successfully loaded. thinkpad_acpi: procfs hotkey enable/disable: access by process with PID 2083 ------------[ cut here ]------------ WARNING: at drivers/platform/x86/thinkpad_acpi.c:3312 hotkey_enabledisable_warn+0x4c/0x60() Hardware name: 7458AJ7 thinkpad_acpi: hotkey enable/disable functionality has been removed from the driver. Hotkeys are always enabled Modules linked in: hdaps tp_smapi thinkpad_ec Pid: 2083, comm: runscript.sh Not tainted 2.6.31-gentoo #22 Call Trace: [<c102780e>] ? warn_slowpath_common+0x6e/0xb0 [<c12fb0dc>] ? hotkey_enabledisable_warn+0x4c/0x60 [<c102789b>] ? warn_slowpath_fmt+0x2b/0x30 [<c12fb0dc>] ? hotkey_enabledisable_warn+0x4c/0x60 [<c12fb190>] ? hotkey_write+0xa0/0x1e0 [<c12fb53c>] ? dispatch_procfs_write+0x5c/0xc0 [<c12fb56a>] ? dispatch_procfs_write+0x8a/0xc0 [<c10c7166>] ? proc_file_write+0x56/0x80 [<c10c7110>] ? proc_file_write+0x0/0x80 [<c10c32fd>] ? proc_reg_write+0x5d/0x90 [<c10c32a0>] ? proc_reg_write+0x0/0x90 [<c10894d8>] ? vfs_write+0xa8/0x170 [<c1019b3c>] ? do_page_fault+0xec/0x2f0 [<c1089661>] ? sys_write+0x41/0x70 [<c1002e88>] ? sysenter_do_call+0x12/0x26 ---[ end trace b95b0144789e1a21 ]--- i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. i915 0000:00:02.0: DVI-D-1: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-4: unable to read EDID block. i915 0000:00:02.0: DVI-D-2: no EDID data fbcondecor: console 0 using theme 'livecd-2007.0' fbcondecor: switched decor state to 'on' on console 0

至于 config.gz 我内核中没开此项

作者: newsky_   发布时间: 2009-09-21

作者: lophyxp   发布时间: 2009-09-21

作者: newsky_   发布时间: 2009-09-21

CONFIG_FAT_DEFAULT_CODEPAGE=936
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"

作者: lophyxp   发布时间: 2009-09-21