SuSE10下鼠标滚轮不起作用了

SuSE10下鼠标滚轮不起作用了

无法滚动网页和其他的一切了。

该怎么设置啊？

这是我的xorg.conf中的鼠标配置段
我的鼠标是清华紫光的光电ps/2鼠标（可能是冒牌清华紫光的，）
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "7"
Option "Device" "/dev/input/mice"
Option "Name" "ExplorerPS/2"
Option "Protocol" "ExplorerPS/2"
Option "Vendor" "PS/2-Mouse"
Option "ZAxisMapping" "4 5"
EndSection

原来行吗？重启系统了吗？win下行吗？yast硬件设置信息看过吗？先试试yast－硬件－鼠标型号

win下可以，原来也可以的，我在Yast里看过了，好像也没什么问题的！

那我也没招儿。瞎出个主意吧，在yast里改个鼠标型号，重启再改回来。或者原来是gnome的话换成kde。再试试。呵呵，纯粹瞎蒙，没什么根据的。

在 xorg.conf 的 mouse section 裡加如下兩行看看：
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
不保證可 work，但先試試吧。

我的鼠标是清华紫光的，在Yast里怎么选择类型啊？
Xorg.conf里面还有Protol这个Option

贴出你的/etc/X11/xorg.conf来，别人好帮你

这是我的xorg.conf中的鼠标配置段
我的鼠标是清华紫光的光电ps/2鼠标（可能是冒牌清华紫光的，）
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "7"
Option "Device" "/dev/input/mice"
Option "Name" "ExplorerPS/2"
Option "Protocol" "ExplorerPS/2"
Option "Vendor" "PS/2-Mouse"
Option "ZAxisMapping" "4 5"
EndSection

内容和我的差不多，我的是USB的，你的是PS／2的。

但就是滚轮不能用。

sax2里面有 设置鼠标的
Activate Mouse Wheel
的选项点了没有？

我也是

那個鼠標滾輪，往下按，就跳出來另一個網業

Activate Mouse Wheel
我点了
sax2里面其他的我没点。

"Buttons" "7" ？

没关系啊。老大。我的是 buttons "5"

以前点一下会出来个带上下左右四个箭头的圆圈，可以上下左右的移动网页，现在也是你这种现象了，找了很久的原因都没解决。

这是我的config
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "ImPS/2 Logitech Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "Mouse[3]"
Option "Device" "/dev/input/event3"
Option "InputFashion" "Tablet"
Option "Mode" "Absolute"
Option "Name" "INTUOS v1"
Option "Name" "2"
Option "Name" "3 (USB)"
Option "SendCoreEvents" "on"
Option "Tilt" "on"
Option "Type" "cursor"
Option "USB" "on"
Option "Vendor" "WACOM"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "Mouse[5]"
Option "Device" "/dev/input/event3"
Option "InputFashion" "Pen"
Option "Mode" "Absolute"
Option "Name" "INTUOS v1"
Option "Name" "2"
Option "Name" "3 Stylus (USB)"
Option "Protocol" "Auto"
Option "SendCoreEvents" "on"
Option "Tilt" "on"
Option "Type" "stylus"
Option "USB" "on"
Option "Vendor" "WACOM"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "Mouse[7]"
Option "Device" "/dev/input/event3"
Option "InputFashion" "Eraser"
Option "Mode" "Absolute"
Option "Name" "INTUOS v1"
Option "Name" "2"
Option "Name" "3 Eraser (USB)"
Option "Protocol" "Auto"
Option "SendCoreEvents" "on"
Option "Tilt" "on"
Option "Type" "eraser"
Option "USB" "on"
Option "Vendor" "WACOM"
EndSection