fdisk unable to open /dev/sda...

[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 7f89c000 - 7ffff993
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fe4993
[ 0.000000] Move RAMDISK from 000000007f89c000 - 000000007ffff992 to 00881000 - 00fe4992
[ 0.000000] ACPI: RSDP 000F8020, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT BFFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT BFFF3180, 5D5C (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS BFFF0000, 0040
[ 0.000000] ACPI: SSDT BFFF9000, 00D3 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: MCFG BFFF9140, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC BFFF8F40, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2187MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fe4993] NEW RAMDISK ==> [0000881000 - 0000fe4993]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f3ec0] 000f3ec0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bfff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfff0
[ 0.000000] On node 0 totalpages: 786303
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4376 pages used for memmap
[ 0.000000] HighMem zone: 555738 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1808.339 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 15728000 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 3088208k/3145664k available (4126k kernel code, 56160k reserved, 2208k data, 532k init, 2240456k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.67 BogoMIPS (lpj=7233356)
[ 0.004032] Security Framework initialized
[ 0.004043] SELinux: Disabled at boot.
[ 0.004069] AppArmor: AppArmor initialized
[ 0.004078] Mount-cache hash table entries: 512
[ 0.004234] Initializing cgroup subsys ns
[ 0.004238] Initializing cgroup subsys cpuacct
[ 0.004241] Initializing cgroup subsys memory
[ 0.004245] Initializing cgroup subsys freezer
[ 0.004260] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004262] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004267] using C1E aware idle routine
[ 0.004279] Checking 'hlt' instruction... OK.
[ 0.020578] SMP alternatives: switching to UP code
[ 0.146485] ACPI: Core revision 20080926
[ 0.149182] ACPI: Checking initramfs for custom DSDT
[ 0.469569] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.509261] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
[ 0.512002] Brought up 1 CPUs
[ 0.512002] Total of 1 processors activated (3616.67 BogoMIPS).
[ 0.512002] CPU0 attaching NULL sched-domain.
[ 0.512002] net_namespace: 776 bytes
[ 0.512002] Booting paravirtualized kernel on bare hardware
[ 0.512002] Time: 3:56:54 Date: 10/11/09
[ 0.512002] regulator: core version 0.5
[ 0.512002] NET: Registered protocol family 16
[ 0.512002] EISA bus registered
[ 0.512002] ACPI: bus type pci registered
[ 0.512002] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.512002] PCI: MCFG area at e0000000 reserved in E820
[ 0.512002] PCI: Using MMCONFIG for extended config space
[ 0.512002] PCI: Using configuration type 1 for base access
[ 0.512002] ACPI: EC: Look up EC in DSDT
[ 0.518876] ACPI: Interpreter enabled
[ 0.518879] ACPI: (supports S0 S1 S4 S5)
[ 0.518899] ACPI: Using IOAPIC for interrupt routing
[ 0.527690] ACPI: No dock devices found.
[ 0.527701] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.527790] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.527805] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f]
[ 0.527813] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.527817] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.527825] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.527828] pci 0000:00:01.1: PME# disabled
[ 0.527846] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.527860] pci 0000:00:02.0: supports D1 D2
[ 0.527863] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.527866] pci 0000:00:02.0: PME# disabled
[ 0.527883] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 0.527898] pci 0000:00:02.1: supports D1 D2
[ 0.527900] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.527903] pci 0000:00:02.1: PME# disabled
[ 0.527923] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff]
[ 0.527927] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff]
[ 0.527931] pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.527942] pci 0000:00:04.0: supports D1 D2
[ 0.527962] pci 0000:00:06.0: reg 20 io port: [0xe800-0xe80f]
[ 0.527981] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.527985] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.527989] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
[ 0.527992] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
[ 0.527996] pci 0000:00:07.0: reg 20 io port: [0xd400-0xd40f]
[ 0.528005] pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.528023] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.528027] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.528031] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.528034] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.528038] pci 0000:00:08.0: reg 20 io port: [0xc000-0xc00f]
[ 0.528042] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.528069] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.528073] pci 0000:00:0a.0: reg 14 io port: [0xbc00-0xbc07]
[ 0.528086] pci 0000:00:0a.0: supports D1 D2
[ 0.528088] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528091] pci 0000:00:0a.0: PME# disabled
[ 0.528112] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528115] pci 0000:00:0b.0: PME# disabled
[ 0.528136] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528138] pci 0000:00:0c.0: PME# disabled
[ 0.528159] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528162] pci 0000:00:0d.0: PME# disabled
[ 0.528182] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528185] pci 0000:00:0e.0: PME# disabled
[ 0.528284] pci 0000:00:09.0: transparent bridge
[ 0.528287] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[ 0.528290] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.528294] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.528325] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
[ 0.528328] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.528332] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.528363] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
[ 0.528366] pci 0000:00:0c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
[ 0.528370] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.528400] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff]
[ 0.528403] pci 0000:00:0d.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.528407] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
[ 0.528428] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.528436] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.528443] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.528448] pci 0000:05:00.0: reg 24 io port: [0x6c00-0x6c7f]
[ 0.528452] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.528489] pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff]
[ 0.528492] pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
[ 0.528496] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.528506] bus 00 -> node 0
[ 0.528514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.528916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.596204] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.596401] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.596599] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 9 10 11 12 14 15)
[ 0.596794] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.596989] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.597186] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 9 10 *11 12 14 15)
[ 0.597382] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.597579] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 9 *10 11 12 14 15)
[ 0.597776] ACPI: PCI Interrupt Link [LACI] (IRQs 5 9 10 *11 12 14 15)
[ 0.597971] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.598171] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 9 *10 11 12 14 15)
[ 0.598368] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 9 10 11 12 14 15)
[ 0.598567] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.598781] ACPI: PCI Interrupt Link [LSID] (IRQs 5 9 *10 11 12 14 15)
[ 0.598990] ACPI: PCI Interrupt Link [LFID] (IRQs 5 9 10 *11 12 14 15)
[ 0.599196] ACPI: PCI Interrupt Link [LPCA] (IRQs 5 9 10 11 12 14 15) *0, disabled.
[ 0.599415] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.599630] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.599844] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.600063] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.600204] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.600427] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.600649] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.600870] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.601091] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.601313] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.601535] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.601756] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.601977] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.602217] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.602447] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.602677] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.602818] ACPI: WMI: Mapper loaded
[ 0.603012] SCSI subsystem initialized
[ 0.603053] libata version 3.00 loaded.
[ 0.603098] usbcore: registered new interface driver usbfs
[ 0.603115] usbcore: registered new interface driver hub
[ 0.603140] usbcore: registered new device driver usb
[ 0.603247] PCI: Using ACPI for IRQ routing
[ 0.603328] Bluetooth: Core ver 2.13
[ 0.603328] NET: Registered protocol family 31
[ 0.603328] Bluetooth: HCI device and connection manager initialized
[ 0.603328] Bluetooth: HCI socket layer initialized
[ 0.603328] NET: Registered protocol family 8
[ 0.603328] NET: Registered protocol family 20
[ 0.603328] NetLabel: Initializing
[ 0.603328] NetLabel: domain hash size = 128
[ 0.603328] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.603328] NetLabel: unlabeled traffic allowed by default
[ 0.603328] AppArmor: AppArmor Filesystem Enabled
[ 0.603328] pnp: PnP ACPI init
[ 0.603328] ACPI: bus type pnp registered
[ 0.609570] pnp: PnP ACPI: found 14 devices
[ 0.609572] ACPI: ACPI bus type pnp unregistered
[ 0.609575] PnPBIOS: Disabled by ACPI PNP
[ 0.609584] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.609587] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.609590] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.609593] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.609596] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.609599] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.609605] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.609607] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.609610] system 00:02: ioport range 0x290-0x30f has been reserved
[ 0.609618] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.609628] system 00:0d: iomem range 0xd1800-0xd3fff has been reserved
[ 0.609631] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.609634] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.609637] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.609640] system 00:0d: iomem range 0xbfff0000-0xbfffffff could not be reserved
[ 0.609643] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.609650] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.609653] system 00:0d: iomem range 0x100000-0xbffeffff could not be reserved
[ 0.609656] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.609659] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.609662] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.609665] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.609668] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.609671] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.644365] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.644368] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.644372] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.644375] pci 0000:00:09.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.644379] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.644382] pci 0000:00:0b.0: IO window: 0x9000-0x9fff
[ 0.644385] pci 0000:00:0b.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.644388] pci 0000:00:0b.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.644392] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.644394] pci 0000:00:0c.0: IO window: 0x8000-0x8fff
[ 0.644398] pci 0000:00:0c.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.644401] pci 0000:00:0c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.644404] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.644407] pci 0000:00:0d.0: IO window: 0x7000-0x7fff
[ 0.644410] pci 0000:00:0d.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.644413] pci 0000:00:0d.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[ 0.644420] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[ 0.644422] pci 0000:00:0e.0: IO window: 0x6000-0x6fff
[ 0.644425] pci 0000:00:0e.0: MEM window: 0xfa000000-0xfcffffff
[ 0.644428] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.644437] pci 0000:00:09.0: setting latency timer to 64
[ 0.644443] pci 0000:00:0b.0: setting latency timer to 64
[ 0.644447] pci 0000:00:0c.0: setting latency timer to 64
[ 0.644451] pci 0000:00:0d.0: setting latency timer to 64
[ 0.644456] pci 0000:00:0e.0: setting latency timer to 64
[ 0.644460] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.644462] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.644464] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.644467] bus: 01 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.644469] bus: 01 index 2 mmio: [0xfdf00000-0xfdffffff]
[ 0.644471] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.644473] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.644475] bus: 02 index 0 io port: [0x9000-0x9fff]
[ 0.644477] bus: 02 index 1 mmio: [0xfdd00000-0xfddfffff]
[ 0.644480] bus: 02 index 2 mmio: [0xfdc00000-0xfdcfffff]
[ 0.644482] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.644484] bus: 03 index 0 io port: [0x8000-0x8fff]
[ 0.644486] bus: 03 index 1 mmio: [0xfdb00000-0xfdbfffff]
[ 0.644488] bus: 03 index 2 mmio: [0xfda00000-0xfdafffff]
[ 0.644490] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.644492] bus: 04 index 0 io port: [0x7000-0x7fff]
[ 0.644494] bus: 04 index 1 mmio: [0xfd900000-0xfd9fffff]
[ 0.644496] bus: 04 index 2 mmio: [0xfd800000-0xfd8fffff]
[ 0.644498] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.644500] bus: 05 index 0 io port: [0x6000-0x6fff]
[ 0.644503] bus: 05 index 1 mmio: [0xfa000000-0xfcffffff]
[ 0.644505] bus: 05 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.644507] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.644517] NET: Registered protocol family 2
[ 0.644548] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.644548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.645202] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.645643] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.645646] TCP reno registered
[ 0.645665] NET: Registered protocol family 1
[ 0.645665] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 0.960077] it is
[ 1.304769] Freeing initrd memory: 7566k freed
[ 1.304869] cpufreq: No nForce2 chipset.
[ 1.305014] audit: initializing netlink socket (disabled)
[ 1.305032] type=2000 audit(1255233414.304:1): initialized
[ 1.313664] highmem bounce pool size: 64 pages
[ 1.313670] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.314868] VFS: Disk quotas dquot_6.5.1
[ 1.314923] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.315520] fuse init (API version 7.10)
[ 1.315597] msgmni has been set to 1672
[ 1.315761] alg: No test for stdrng (krng)
[ 1.315771] io scheduler noop registered
[ 1.315773] io scheduler anticipatory registered
[ 1.315775] io scheduler deadline registered
[ 1.315790] io scheduler cfq registered (default)
[ 1.315808] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.315900] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.315907] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 1.315912] pci 0000:00:0b.0: Linking AER extended capability
[ 1.315921] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.315927] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.315930] pci 0000:00:0c.0: Linking AER extended capability
[ 1.315939] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.315946] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.315948] pci 0000:00:0d.0: Linking AER extended capability
[ 1.315957] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.315963] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.315966] pci 0000:00:0e.0: Linking AER extended capability
[ 1.315982] pci 0000:05:00.0: Boot video device
[ 1.322549] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.322569] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.322585] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[ 1.322591] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.322605] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.322637] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.322656] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.322666] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[ 1.322672] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.322686] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.322717] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.322736] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.322746] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[ 1.322752] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.322763] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.322795] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.322814] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.322823] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[ 1.322829] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.322841] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.322884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.322893] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.323037] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.323040] ACPI: Power Button (FF) [PWRF]
[ 1.323081] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.323084] ACPI: Power Button (CM) [PWRB]
[ 1.323134] fan PNP0C0B:00: registered as cooling_device0
[ 1.323139] ACPI: Fan [FAN] (on)
[ 1.323670] processor ACPI_CPU:00: registered as cooling_device1
[ 1.327950] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.328320] ACPI: Thermal Zone [THRM] (40 C)
[ 1.328366] isapnp: Scanning for PnP cards...
[ 1.680815] isapnp: No Plug & Play device found
[ 1.682157] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.682264] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.682517] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.683275] brd: module loaded
[ 1.683587] loop: module loaded
[ 1.683652] Fixed MDIO Bus: probed
[ 1.683658] PPP generic driver version 2.4.2
[ 1.683732] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.683758] Driver 'sd' needs updating - please use bus_type methods
[ 1.683767] Driver 'sr' needs updating - please use bus_type methods
[ 1.683939] sata_nv 0000:00:07.0: version 3.5
[ 1.684453] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.684465] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.684535] sata_nv 0000:00:07.0: setting latency timer to 64
[ 1.684632] scsi0 : sata_nv
[ 1.684732] scsi1 : sata_nv
[ 1.684907] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
[ 1.684910] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
[ 2.564029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.608254] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 2.608257] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.674910] ata1.00: configured for UDMA/133
[ 3.664026] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.143369] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 4.143372] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.156315] ata2.00: configured for UDMA/133
[ 4.156437] scsi 0:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 4.156534] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.156551] sd 0:0:0:0: [sda] Write Protect is off
[ 4.156554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.156577] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.156644] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.156657] sd 0:0:0:0: [sda] Write Protect is off
[ 4.156660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.156681] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.156686] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 4.254466] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.254515] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.254582] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 4.254656] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 4.254670] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.254672] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.254694] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.254740] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 4.254753] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.254755] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.254777] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.254781] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[ 4.299365] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.299399] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.299876] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 4.299885] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 4.299938] sata_nv 0000:00:08.0: setting latency timer to 64
[ 4.300024] scsi2 : sata_nv
[ 4.300076] scsi3 : sata_nv
[ 4.300243] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 22
[ 4.300246] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22
[ 5.180028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.203119] ata3.00: ATA-8: WDC WD3200AAJS-00B4A0, 01.03A01, max UDMA/133
[ 5.203122] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.216285] ata3.00: configured for UDMA/133
[ 5.940022] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.940101] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
[ 5.940180] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 5.940194] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.940197] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.940220] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.940274] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 5.940287] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.940290] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.940311] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.940315] sdc: sdc1 sdc2 sdc3 < sdc5 >
[ 5.965678] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 5.965721] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.965806] pata_amd 0000:00:06.0: version 0.3.10
[ 5.965849] pata_amd 0000:00:06.0: setting latency timer to 64
[ 5.965918] scsi4 : pata_amd
[ 5.965971] scsi5 : pata_amd
[ 5.966749] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[ 5.966752] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[ 6.128254] ata5.00: ATAPI: ASUS DVD-E616A2, 1.03, max UDMA/100
[ 6.128278] ata5: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
[ 6.144206] ata5.00: configured for UDMA/100
[ 6.311257] scsi 4:0:0:0: CD-ROM ASUS DVD-E616A2 1.03 PQ: 0 ANSI: 5
[ 6.311881] sr0: scsi3-mmc drive: 24x/48x cd/rw xa/form2 cdda tray
[ 6.311885] Uniform CD-ROM driver Revision: 3.20
[ 6.311992] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.312043] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 6.312511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.312869] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 6.312879] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 6.312902] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 6.312905] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.312964] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 6.312998] ehci_hcd 0000:00:02.1: debug port 1
[ 6.313002] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 6.313020] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 6.324023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 6.324093] usb usb1: configuration #1 chosen from 1 choice
[ 6.324121] hub 1-0:1.0: USB hub found
[ 6.324131] hub 1-0:1.0: 10 ports detected
[ 6.324236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.324569] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 6.324575] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 6.324585] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 6.324588] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.324630] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 6.324649] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 6.382052] usb usb2: configuration #1 chosen from 1 choice
[ 6.382078] hub 2-0:1.0: USB hub found
[ 6.382086] hub 2-0:1.0: 10 ports detected
[ 6.382170] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.382225] usbcore: registered new interface driver libusual
[ 6.382255] usbcore: registered new interface driver usbserial
[ 6.382269] USB Serial support registered for generic
[ 6.382281] usbcore: registered new interface driver usbserial_generic
[ 6.382283] usbserial: USB Serial Driver core
[ 6.382328] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 6.384612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.384617] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.384733] mice: PS/2 mouse device common for all mice
[ 6.384887] rtc_cmos 00:04: RTC can wake from S4
[ 6.384919] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 6.384941] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 6.385003] device-mapper: uevent: version 1.0.3
[ 6.385115] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
[ 6.385164] device-mapper: multipath: version 1.0.5 loaded
[ 6.385167] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 6.385238] EISA: Probing bus 0 at eisa.0
[ 6.385245] Cannot allocate resource for EISA slot 1
[ 6.385257] Cannot allocate resource for EISA slot 6
[ 6.385259] Cannot allocate resource for EISA slot 7
[ 6.385261] Cannot allocate resource for EISA slot 8
[ 6.385262] EISA: Detected 0 cards.
[ 6.385291] cpuidle: using governor ladder
[ 6.385293] cpuidle: using governor menu
[ 6.385797] TCP cubic registered
[ 6.385891] NET: Registered protocol family 10
[ 6.386287] lo: Disabled Privacy Extensions
[ 6.386594] NET: Registered protocol family 17
[ 6.386610] Bluetooth: L2CAP ver 2.11
[ 6.386611] Bluetooth: L2CAP socket layer initialized
[ 6.386614] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.386616] Bluetooth: SCO socket layer initialized
[ 6.386641] Bluetooth: RFCOMM socket layer initialized
[ 6.386648] Bluetooth: RFCOMM TTY layer initialized
[ 6.386650] Bluetooth: RFCOMM ver 1.10
[ 6.386674] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 6.386719] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 6.386722] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 6.386763] Using IPI No-Shortcut mode
[ 6.386831] registered taskstats version 1
[ 6.386952] Magic number: 13:57:917
[ 6.387070] rtc_cmos 00:04: setting system clock to 2009-10-11 03:56:59 UTC (1255233419)
[ 6.387074] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.387076] EDD information not available.
[ 6.387484] Freeing unused kernel memory: 532k freed
[ 6.387620] Write protecting the kernel text: 4128k
[ 6.387666] Write protecting the kernel read-only data: 1532k
[ 6.417122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 6.816868] Floppy drive(s): fd0 is 1.44M
[ 6.835910] FDC 0 is a post-1991 82077
[ 6.995959] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.996406] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 6.996412] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 6.996418] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 6.996543] nv_probe: set workaround bit for reversed mac addr
[ 7.516968] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 9, addr 00:30:18:a5:bd:ba
[ 7.516973] forcedeth 0000:00:0a.0: highdma csum timirq lnktim desc-v3
[ 8.146962] EXT4-fs: INFO: recovery required on readonly filesystem.
[ 8.146967] EXT4-fs: write access will be enabled during recovery.
[ 8.160537] EXT4-fs: barriers enabled
[ 8.179574] kjournald2 starting. Commit interval 5 seconds
[ 8.179584] EXT4-fs: delayed allocation enabled
[ 8.179585] EXT4-fs: file extents enabled
[ 8.185783] EXT4-fs: mballoc enabled
[ 8.185785] EXT4-fs: recovery complete.
[ 8.193095] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.210749] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 8.210753] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 8.210755] EXT4-fs: mballoc: 0 generated and it took 0
[ 8.210757] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 8.259463] EXT4-fs: INFO: recovery required on readonly filesystem.
[ 8.259467] EXT4-fs: write access will be enabled during recovery.
[ 8.287352] EXT4-fs: barriers enabled
[ 8.300973] kjournald2 starting. Commit interval 5 seconds
[ 8.300983] EXT4-fs: delayed allocation enabled
[ 8.300985] EXT4-fs: file extents enabled
[ 8.307168] EXT4-fs: mballoc enabled
[ 8.307170] EXT4-fs: recovery complete.
[ 8.314495] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.327679] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 8.327683] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 8.327685] EXT4-fs: mballoc: 0 generated and it took 0
[ 8.327687] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 8.398512] EXT4-fs: INFO: recovery required on readonly filesystem.
[ 8.398516] EXT4-fs: write access will be enabled during recovery.
[ 8.409751] EXT4-fs: barriers enabled
[ 8.424220] kjournald2 starting. Commit interval 5 seconds
[ 8.424230] EXT4-fs: delayed allocation enabled
[ 8.424231] EXT4-fs: file extents enabled
[ 8.430278] EXT4-fs: mballoc enabled
[ 8.430280] EXT4-fs: recovery complete.
[ 8.430515] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.458262] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 8.458266] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 8.458268] EXT4-fs: mballoc: 0 generated and it took 0
[ 8.458270] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 8.495352] kjournald starting. Commit interval 5 seconds
[ 8.495364] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.526812] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.526816] EXT3-fs: write access will be enabled during recovery.
[ 8.551658] kjournald starting. Commit interval 5 seconds
[ 8.551666] EXT3-fs: recovery complete.
[ 8.551893] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.724636] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 11.804404] ISO 9660 Extensions: RRIP_1991A
[ 12.126317] aufs 20080922
[ 12.347904] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 78.538626] udev: starting version 141
[ 78.717868] parport_pc 00:09: reported by Plug and Play ACPI
[ 78.717909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 78.897127] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 78.897172] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 80.401004] ppdev: user-space parallel port driver
[ 80.445522] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 80.588032] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 80.742943] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 80.742950] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 80.743122] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 81.040441] psmouse serio1: ID: 10 00 64<6>intel8x0_measure_ac97_clock: measured 54558 usecs
[ 81.064024] intel8x0: clocking to 46903
[ 81.536379] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 83.972003] Adding 5863684k swap on /dev/sda10. Priority:-1 extents:1 across:5863684k
[ 92.032195] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 92.032199] Bluetooth: BNEP filters: protocol multicast
[ 92.179901] Bridge firewalling registered
[ 98.971480] lp0: using parport0 (interrupt-driven).
[ 100.889329] eth0: no link during initialization.
[ 100.889796] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 194.144030] Clocksource tsc unstable (delta = -88874156 ns)
[ 278.861987] EXT4-fs: barriers enabled
[ 278.877707] kjournald2 starting. Commit interval 5 seconds
[ 278.878062] EXT4 FS on sda5, internal journal on sda5:8
[ 278.878067] EXT4-fs: delayed allocation enabled
[ 278.878070] EXT4-fs: file extents enabled
[ 278.890540] EXT4-fs: mballoc enabled
[ 278.890550] EXT4-fs: mounted filesystem with ordered data mode.
[ 98.971480] lp0: using parport0 (interrupt-driven).
[ 100.889329] eth0: no link during initialization.
[ 100.889796] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 194.144030] Clocksource tsc unstable (delta = -88874156 ns)
[ 278.861987] EXT4-fs: barriers enabled
[ 278.877707] kjournald2 starting. Commit interval 5 seconds
[ 278.878062] EXT4 FS on sda5, internal journal on sda5:8
[ 278.878067] EXT4-fs: delayed allocation enabled
[ 278.878070] EXT4-fs: file extents enabled
[ 278.890540] EXT4-fs: mballoc enabled
[ 278.890550] EXT4-fs: mounted filesystem with ordered data mode.
[ 282.680687] kjournald starting. Commit interval 5 seconds
[ 282.680858] EXT3 FS on sda9, internal journal
[ 282.680868] EXT3-fs: mounted filesystem with ordered data mode.
[ 300.189382] EXT4-fs: barriers enabled
[ 300.209670] kjournald2 starting. Commit interval 5 seconds
[ 300.209872] EXT4 FS on sda6, internal journal on sda6:8
[ 300.209875] EXT4-fs: delayed allocation enabled
[ 300.209877] EXT4-fs: file extents enabled
[ 300.216122] EXT4-fs: mballoc enabled
[ 300.216127] EXT4-fs: mounted filesystem with ordered data mode.
[ 302.348381] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 302.348398] ReiserFS: sda1: using ordered data mode
[ 302.353373] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 302.354000] ReiserFS: sda1: checking transaction log (sda1)
[ 302.364550] ReiserFS: sda1: replayed 9 transactions in 0 seconds
[ 302.406094] ReiserFS: sda1: Using r5 hash to sort names
[ 303.852201] EXT4-fs: barriers enabled
[ 303.863011] kjournald2 starting. Commit interval 5 seconds
[ 303.863192] EXT4 FS on sda7, internal journal on sda7:8
[ 303.863196] EXT4-fs: delayed allocation enabled
[ 303.863199] EXT4-fs: file extents enabled
[ 303.874129] EXT4-fs: mballoc enabled
[ 303.874137] EXT4-fs: mounted filesystem with ordered data mode.
[ 306.528515] kjournald starting. Commit interval 5 seconds
[ 306.528672] EXT3 FS on sda8, internal journal
[ 306.528682] EXT3-fs: mounted filesystem with ordered data mode.
[ 733.467506] eth0: link up.
[ 733.467914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 744.032022] eth0: no IPv6 routers present
[ 2059.285534] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 2059.285544] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 2059.285549] EXT4-fs: mballoc: 0 generated and it took 0
[ 2059.285553] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 2061.647805] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 2061.647813] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 2061.647818] EXT4-fs: mballoc: 0 generated and it took 0
[ 2061.647821] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 2063.448848] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 2063.448857] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 2063.448862] EXT4-fs: mballoc: 0 generated and it took 0
[ 2063.448866] EXT4-fs: mballoc: 0 preallocated, 0 discarded