emerge -pv xorg-server 出错

用的是VMware装，
★★★----------emerge -pv xorg-server 出错回显，说什么环形依赖问题。。。。---------------------------------------------------

mojian ~ # emerge -av xorg-x11

These are the packages that would be merged, in order:

Calculating dependencies... done!


[nomerge ] x11-base/xorg-x11-7.4
[nomerge ] x11-base/xorg-server-1.5.3-r1 USE="hal ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VIDEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -voodoo -xgi"
[ebuild N ] sys-apps/hal-0.5.11-r6 USE="X crypt -acpi -apm -debug -dell -disk-partition -doc -laptop (-selinux)"
[ebuild N ] dev-python/pyxf86config-0.3.34-r2
[ebuild N ] x11-base/xorg-server-1.5.3-r1 USE="hal ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VIDEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -voodoo -xgi"

* Error: circular dependencies:

('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') depends on
('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') (hard)
('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') depends on
('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') (hard)
('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') depends on
('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') (hard)

* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.

mojian ~ #


mojian ~ # emerge -av xorg-x11

These are the packages that would be merged, in order:

Calculating dependencies... done!


[nomerge ] x11-base/xorg-x11-7.4
[nomerge ] x11-base/xorg-server-1.5.3-r1 USE="hal ipv6 nptl xorg -3dfx -d ebug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -a iptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev - fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penm ount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VI DEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -fgl rx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-ne wport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) ( -sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -v oodoo -xgi"
[ebuild N ] sys-apps/hal-0.5.11-r6 USE="X crypt -acpi -apm -debug -dell - disk-partition -doc -laptop (-selinux)"
[ebuild N ] dev-python/pyxf86config-0.3.34-r2
[ebuild N ] x11-base/xorg-server-1.5.3-r1 USE="hal ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evde v -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -p enmount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VIDEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev - fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic ( -newport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -sava ge -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb ) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -voodoo -xgi"

* Error: circular dependencies:

('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') depends on
('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') (hard)
('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') depends on
('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') (hard)
('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') depends on
('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') (hard)

* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.



★★★---------------make.conf----------------------------------------------------------------------------------------------------------
mojian ~ # emacs /etc/make.conf

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
#CFLAGS="-O2 -march=i686 -pipe"
#CXXFLAGS="-O2 -march=i686 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
#CHOST="i686-pc-linux-gnu"
USE="alsa bash-completion bzip2 jpeg opengl ruby xscreensaver cjk X dbus gtk gnome hal avahi -kde -qt3 \
- qt4 -arts"
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
MAKEOPTS="-j3"
CC="gcc"
PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin:${PATH}"
#PATH="/usr/lib/portage/bin:/usr/i686-pc-linux-gnu/bin:${PATH}"
#PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin:${PATH}"
FEATURES="collision-protect parallel-fetch"
CCACHE_SIZE="2G"
CCACHE_DIR="/var/tmp/ccache"
AUTOCLEAN="yes"
VIDEO_CARDS="vmware"
#VIDEO_CARDS="nvidia"
ALSA_CARDS="hda-intel"
INPUT_DEVICES="keyboard mouse"
LINGUAS="en zh zh_CN"
ACCEPT_KEYWORDS="~x86"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo \
http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"

★★★--------------------emerge --info---------------------------------------------------------------------------------------------

mojian ~ # emerge --info

Portage 2.1.6.6 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.28-gentoo i686)
=================================================================
System uname: Linux-2.6.28-gentoo-i686-Intel-R-_Pentium-R-_D_CPU_2.80GHz-with-glibc2.0
Timestamp of tree: Fri, 16 Jan 2009 13:15:01 +0000
ccache version 2.4 [disabled]
app-shells/bash: 3.2_p17-r1
dev-lang/python: 2.4.4-r13
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache: 2.4-r8
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.61-r1
sys-devel/automake: 1.10.1
sys-devel/binutils: 2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 1.5.24
virtual/os-headers: 2.6.23-r3
ACCEPT_KEYWORDS="x86 ~x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="collision-protect distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
LDFLAGS="-Wl,-O1"
LINGUAS="en zh zh_CN"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="X acl alsa avahi bash-completion berkdb bzip2 cjk cli cracklib crypt cups dbus dri fortran gdbm gnome gpm gtk hal iconv ipv6 isdnlog jpeg midi mudflap ncurses nls nptl nptlonly opengl openmp pam pcre perl pppd python qt4 readline reflection ruby session spl ssl sysfs tcpd unicode x86 xorg xscreensaver zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en zh zh_CN" USERLAND="GNU" VIDEO_CARDS="vmware"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY

mojian ~ #

xorg-sever 需要 hal
hal 需要 xorg-server
循环依赖

USE="-X" emerge hal
然后再 emerge xorg-x11

楼上正解，当时也是这样安装过来的。

emerge hal 完了以后，USE="X"要加回去吗？还是直接emerge xorg-x11????

看置顶帖

USE="-hal" emerge xorg-server && emerge -1uDN xorg-server hal && emerge xorg-x11

按照你的命令，USE去掉"X"，emerge hal，后emerge xorg-x11...........又出错了，
----------------------------USE去掉"X"后,emerge hal,然后再 emerge xorg-x11出错------------------

mojian mojian #：emerge xorg-x11


...
...
...

>>> Emerging (3 of 11) x11-apps/xinit-1.0.8-r3
* xinit-1.0.8.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* You MUST build sys-apps/dbus with the X USE flag enabled.
*
* ERROR: x11-apps/xinit-1.0.8-r3 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* xinit-1.0.8-r3.ebuild, line 37: Called die
* The specific snippet of code:
* die "You MUST build sys-apps/dbus with the X USE flag enabled."
* The die message:
* You MUST build sys-apps/dbus with the X USE flag enabled.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/die.env'.
*

>>> Failed to emerge x11-apps/xinit-1.0.8-r3, Log file:

>>> '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/build.log'

* Messages for package x11-apps/xinit-1.0.8-r3:

* You MUST build sys-apps/dbus with the X USE flag enabled.
*
* ERROR: x11-apps/xinit-1.0.8-r3 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* xinit-1.0.8-r3.ebuild, line 37: Called die
* The specific snippet of code:
* die "You MUST build sys-apps/dbus with the X USE flag enabled."
* The die message:
* You MUST build sys-apps/dbus with the X USE flag enabled.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/die.env'.
*

* GNU info directory index is up-to-date.

* IMPORTANT: 3 config files in '/etc' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
mojian mojian # env-update && source /etc/profile
>>> Regenerating /etc/ld.so.cache...
mojian mojian # Xorg -configure
bash: Xorg: command not found
mojian mojian # Xorg -configure
bash: Xorg: command not found
mojian mojian # man 5 xorg.conf
No entry for xorg.conf in section 5 of the manual

mojian mojian #


----------------------------make.conf--------------------------------------------

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
#CFLAGS="-O2 -march=i686 -pipe"
#CXXFLAGS="-O2 -march=i686 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
#CHOST="i686-pc-linux-gnu"
USE="alsa bash-completion bzip2 jpeg opengl ruby xscreensaver cjk dbus gtk gnome hal \
avahi -kde -qt3 - qt4 -arts"
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
MAKEOPTS="-j3"
CC="gcc"
PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin:${PATH}"
#PATH="/usr/lib/portage/bin:/usr/i686-pc-linux-gnu/bin:${PATH}"
#PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin:${PATH}"
FEATURES="collision-protect parallel-fetch"
CCACHE_SIZE="2G"
CCACHE_DIR="/var/tmp/ccache"
AUTOCLEAN="yes"
VIDEO_CARDS="vmware"
#VIDEO_CARDS="nvidia"
ALSA_CARDS="hda-intel"
INPUT_DEVICES="keyboard mouse"
LINGUAS="en zh zh_CN"
ACCEPT_KEYWORDS="~x86"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo \
http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"
-----------emerge --info---------------------------------------------------------------------------------


mojian mojian # emerge --info
Portage 2.1.6.6 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.28-gentoo i6 86)
=================================================================
System uname: Linux-2.6.28-gentoo-i686-Intel-R-_Pentium-R-_D_CPU_2.80GHz-with-glibc2.0
Timestamp of tree: Fri, 16 Jan 2009 13:15:01 +0000
ccache version 2.4 [disabled]
app-shells/bash: 3.2_p17-r1
dev-lang/python: 2.4.4-r13
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache: 2.4-r8
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.61-r1
sys-devel/automake: 1.9.6-r2, 1.10.1
sys-devel/binutils: 2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 1.5.24
virtual/os-headers: 2.6.23-r3
ACCEPT_KEYWORDS="x86 ~x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/ud ev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="collision-protect distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/ "
LDFLAGS="-Wl,-O1"
LINGUAS="en zh zh_CN"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --forc e --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local -- exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="acl alsa avahi bash-completion berkdb bzip2 cjk cli cracklib crypt cups dbus dri fortran gdbm gnome gpm gtk hal iconv ipv6 isdnlog jpeg midi mudflap ncurses nls nptl n ptlonly opengl openmp pam pcre perl pppd python qt4 readline reflection ruby session s pl ssl sysfs tcpd unicode x86 xorg xscreensaver zlib" ALSA_CARDS="hda-intel" ALSA_PCM_ PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplu g ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm soft vol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_ default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner auth z_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filt er file_cache filter headers include info log_config logio mem_cache mime mime_magic n egotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" EL IBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz c fontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en zh zh_CN" USERLAND ="GNU" VIDEO_CARDS="vmware"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, PO RTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY

我再把"X"加到USE里，试试你的：）

我就是这 么干的...

新装的gentoo

除了安装xorg-server遇到循环依赖.. 其他一切正常

楼主，先安装dbus吧

emerge sys-apps/dbus

USE="-hal"

这个也是一条shell命令吗？还是要到make.conf里面改？

到这里又卡住了。。。。。。。。。



installing ../lib/libform.a as /var/tmp/portage/sys-libs/ncurses-5.7/image//lib/libform.a
/usr/bin/install -c -m 644 ../lib/libform.a /var/tmp/portage/sys-libs/ncurses-5.7/image//lib/libform.a
i686-pc-linux-gnu-ranlib /var/tmp/portage/sys-libs/ncurses-5.7/image//lib/libform.a
installing /var/tmp/portage/sys-libs/ncurses-5.7/work/ncurses-5.7/form/form.h in /var/tmp/portage/sys-libs/ncurses-5.7/image//usr/include
make[1]: Leaving directory `/var/tmp/portage/sys-libs/ncurses-5.7/work/narrowc/form'
cd test && make DESTDIR="/var/tmp/portage/sys-libs/ncurses-5.7/image/" install
make[1]: Entering directory `/var/tmp/portage/sys-libs/ncurses-5.7/work/narrowc/test'
make[1]: Nothing to be done for `install'.
make[1]: Leaving directory `/var/tmp/portage/sys-libs/ncurses-5.7/work/narrowc/test'
cd misc && make DESTDIR="/var/tmp/portage/sys-libs/ncurses-5.7/image/" install
make[1]: Entering directory `/var/tmp/portage/sys-libs/ncurses-5.7/work/narrowc/misc'
/bin/sh /var/tmp/portage/sys-libs/ncurses-5.7/work/ncurses-5.7/mkdirs.sh /var/tmp/portage/sys-libs/ncurses-5.7/image//usr/share/tabset
/usr/bin/install -c ncurses-config /var/tmp/portage/sys-libs/ncurses-5.7/image//usr/bin/ncurses5-config
mkdir /var/tmp/portage/sys-libs/ncurses-5.7/image/usr/share/tabset
DESTDIR=/var/tmp/portage/sys-libs/ncurses-5.7/image/ \
prefix=/usr \
exec_prefix=/usr \
bindir=/usr/bin \
top_srcdir=/var/tmp/portage/sys-libs/ncurses-5.7/work/ncurses-5.7 \
srcdir=/var/tmp/portage/sys-libs/ncurses-5.7/work/ncurses-5.7/misc \
datadir=/usr/share \
ticdir=/usr/share/terminfo \
source=terminfo.tmp \
THIS_CC="gcc" \
THAT_CC="i686-pc-linux-gnu-gcc" \
/bin/sh ./run_tic.sh
** Building terminfo database, please wait...
Running tic to install /var/tmp/portage/sys-libs/ncurses-5.7/image//usr/share/terminfo ...

You may see messages regarding extended capabilities, e.g., AX.
These are extended terminal capabilities which are compiled
using
tic -x
If you have ncurses 4.2 applications, you should read the INSTALL
document, and install the terminfo without the -x option.

感觉emerge里的提示做的很好了，偶尔有一两次出错马上就能根据提示改过来

俺也想知道，我看不太懂这个提示。

偶觉的你在emerge xorg-server的时候最好屏蔽掉 hal 标志，这个在后面会引入一个BUG
请看下面的连接：

http://blog.163.com/maaa_139/blog/st...71311716/edit/

这个BUG已经提交到gentoo mail-list上了，google之。。。呵呵我忘记连接了。