cd /sources

cd /sources
tar xvf /BLFS/X11R6.9.0-src.tar.bz2
cd xc
patch -Np1 -i /BLFS/xorg-6.9.0-luit_race-1.patch &&
patch -Np1 -i /BLFS/xorg-6.9.0-security-4.patch
sed -i 's@/usr/X11R6@</usr>@' programs/luit/parser.h
sed -i '/^SUBDIRS =/s/ etc$//' programs/Xserver/Xprint/Imakefile
pushd config/util &&
make -f Makefile.ini lndir
popd
mkdir ../xcbuild &&
cd ../xcbuild &&
../xc/config/util/lndir ../xc

cat > config/cf/host.def << "EOF"
/* Begin Xorg host.def file */

/* System Related Information. If you read and configure only one
* section then it should be this one. The Intel architecture defaults
* are set for a i686 and higher. Axp is for the Alpha architecture
* and Ppc is for the Power PC. AMD64 is for the Opteron processor.
* Note that there have been reports that the Ppc optimization line
* causes segmentation faults during build. If that happens, try
* building without the DefaultGcc2PpcOpt line. ***********/

/* #define DefaultGcc2i386Opt -O2 -fno-strength-reduce \
-fno-strict-aliasing -march=i686 */
/* #define DefaultGcc2AMD64Opt -O2 -fno-strength-reduce \
-fno-strict-aliasing */
/* #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 */
/* #define DefaultGcc2PpcOpt -O2 -mcpu=750 */

#define HasFreetype2 YES
#define HasFontconfig YES
#define HasExpat YES
#define HasLibpng YES
#define HasZlib YES

/* Uncomment the following define if you'd like
* xdm to use Linux-PAM
#define HasPam YES
*/

/*
* Which drivers to build. When building a static server, each of
* these will be included in it. When building the loadable server
* each of these modules will be built.
*
#define XF86CardDrivers mga glint nv tga s3virge sis rendition \
neomagic i740 tdfx savage \
cirrus vmware tseng trident chips apm \
GlideDriver fbdev i128 \
ati DevelDrivers ark \
cyrix siliconmotion vesa vga \
XF86OSCardDrivers XF86ExtraCardDrivers
*/

/*
* Select the XInput devices you want by uncommenting this.
*
#define XInputDrivers mouse keyboard acecad calcomp citron \
digitaledge dmc dynapro elographics \
microtouch mutouch penmount spaceorb \
summa wacom void magictouch aiptek
*/

/* Most installs will only need this */

#define XInputDrivers mouse keyboard

/* Xterm is no longer built by default */
#define BuildXterm YES

/* Disable building Xprint server and clients until we get them figured
* out but build Xprint libraries to allow precompiled binaries such as
* Acrobat Reader to run.
*/

#define XprtServer NO
#define BuildXprintClients NO

/* Uncomment the following define if you would prefer to install X into
* /usr or change it to any other location that you prefer.
* The GL related defines disable compatibility symlinks (the links
* are not needed when X is installed in /usr).
#define ProjectRoot /usr
#define LinkGLToUsrInclude NO
#define LinkGLToUsrLib NO
*/

/* End Xorg host.def file */
EOF

sed -i -e "s@^#include <linux/config.h>@/* & */@" \
`grep -lr linux/config.h *` &&
( make World 2>&1 | tee xorg-compile.log && exit $PIPESTATUS )

make install &&
make install.man
ln -v -s ../X11R6/bin /usr/bin/X11 &&
ln -v -s ../X11R6/lib/X11 /usr/lib/X11 &&
ln -v -s ../X11R6/include/X11 /usr/include/X11
install -v -d -m755 /usr/share/fonts &&
ln -svn /usr/X11R6/lib/X11/fonts/TTF /usr/share/fonts/X11-TTF

cat >> /etc/ld.so.conf << "EOF"
/usr/X11R6/lib
EOF
ldconfig &&
cat >> /etc/profile << "EOF"
export PATH=$PATH:/usr/X11R6/bin
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/X11R6/lib/pkgconfig
EOF
/sbin/ldconfig &&
cd ~ &&
/usr/X11R6/bin/Xorg -configure