ext3分区损坏
时间:2009-02-04
来源:互联网
昨天在Gentoo启动时两次强制按电源关机,导致Gentoo无法启动。最后显示:
No filesystem could mount root.tried:ext2 。。。
kernel panic -not syncing:VFS:Unable to mount root fs on unknown-block(8,6) Dumping ftrace buffer:(ftrace buffer empty)
我/boot 在/dev/sda5 根目录/ 在/dev/sda6上
曾经用ubuntu启动盘尝试fsck -p /dev/sda6 e2fsck -fy /dev/sda6
ubuntu@ubuntu:~$ sudo fsck -p /dev/sda6
fsck 1.40.8 (13-Mar-2008)
The problem has occurred looks like a hardware problem. If you have
bad blocks, we advise you to get a new hard drive, because once you
get one bad block that the disk drive internals cannot hide from
your sight,the chances of getting more are generally said to become
much higher (precise statistics are unknown to us), and this disk
drive is probably not expensive enough for you to you to risk your
time and data on it. If you don't want to follow that follow that
advice then if you have just a few bad blocks, try writing to the
bad blocks and see if the drive remaps the bad blocks (that means
it takes a block it has in reserve and allocates it for use for
of that block number). If it cannot remap the block, use badblock
option (-B) with reiserfs utils to handle this block correctly.
bread: Cannot read the block (8210): (Input/output error).
Warning... fsck.reiserfs for device /dev/sda6 exited with signal 6.
ubuntu@ubuntu:~$ sudo e2fsck -fy /dev/sda6
e2fsck 1.40.8 (13-Mar-2008)
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block 当试图打开/dev/sda6时
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
哪位大侠知道怎修复不,难道要重装Gentoo?
No filesystem could mount root.tried:ext2 。。。
kernel panic -not syncing:VFS:Unable to mount root fs on unknown-block(8,6) Dumping ftrace buffer:(ftrace buffer empty)
我/boot 在/dev/sda5 根目录/ 在/dev/sda6上
曾经用ubuntu启动盘尝试fsck -p /dev/sda6 e2fsck -fy /dev/sda6
ubuntu@ubuntu:~$ sudo fsck -p /dev/sda6
fsck 1.40.8 (13-Mar-2008)
The problem has occurred looks like a hardware problem. If you have
bad blocks, we advise you to get a new hard drive, because once you
get one bad block that the disk drive internals cannot hide from
your sight,the chances of getting more are generally said to become
much higher (precise statistics are unknown to us), and this disk
drive is probably not expensive enough for you to you to risk your
time and data on it. If you don't want to follow that follow that
advice then if you have just a few bad blocks, try writing to the
bad blocks and see if the drive remaps the bad blocks (that means
it takes a block it has in reserve and allocates it for use for
of that block number). If it cannot remap the block, use badblock
option (-B) with reiserfs utils to handle this block correctly.
bread: Cannot read the block (8210): (Input/output error).
Warning... fsck.reiserfs for device /dev/sda6 exited with signal 6.
ubuntu@ubuntu:~$ sudo e2fsck -fy /dev/sda6
e2fsck 1.40.8 (13-Mar-2008)
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block 当试图打开/dev/sda6时
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
哪位大侠知道怎修复不,难道要重装Gentoo?
作者: niat03041136 发布时间: 2009-02-04
不是fsck.ext3 /dev/sdXX 吗?
作者: yourfriend 发布时间: 2009-02-04
系统提示没有此命令
作者: niat03041136 发布时间: 2009-02-05
这个包sys-fs/e2fsprogs (/sbin/fsck.ext3)
建议用rescuecd
建议用rescuecd
作者: hezhit 发布时间: 2009-02-05
下个来试下,希望自己好运,要不够折腾的了
作者: niat03041136 发布时间: 2009-02-05
还是不行,看样子得重装了,可恨的是用户目录没有独立分区,好多备份的配置没了,哎
作者: niat03041136 发布时间: 2009-02-05
相关阅读 更多
热门阅读
-
office 2019专业增强版最新2021版激活秘钥/序列号/激活码推荐 附激活工具
阅读:74
-
如何安装mysql8.0
阅读:31
-
Word快速设置标题样式步骤详解
阅读:28
-
20+道必知必会的Vue面试题(附答案解析)
阅读:37
-
HTML如何制作表单
阅读:22
-
百词斩可以改天数吗?当然可以,4个步骤轻松修改天数!
阅读:31
-
ET文件格式和XLS格式文件之间如何转化?
阅读:24
-
react和vue的区别及优缺点是什么
阅读:121
-
支付宝人脸识别如何关闭?
阅读:21
-
腾讯微云怎么修改照片或视频备份路径?
阅读:28