[新手求助]刚装MDV就不成功,进不了系统,郁闷中

我的电脑是Dell6400，装了windows XP系统,最近想接触Linux，就让朋友拿了自己刻的MDV盘来帮我装，谁知装好了，就不能进Linux桌面，提示设置错误如下：

(EE) Problem Parsing the config file
(EE)Error parsing the config file

Fatal Server error:
no screen found

朋友不知道怎么解决，本来想删了装Suse的，但是我想看看能不能把问题解决了。
当时装的时候提示了一个问题，好像是说我的电脑cpu是双核的，软件不支持，请问各位大虾，双核的能不能装MDV啊，如果我说的有什么不清楚，也请大家提出来，我会提供更多的信息。
请大家帮帮我这个无助的新手吧

双核是被支持的。

你的问题是 X 没有配置好，建议运行 XFdrake 重新配置。

我运行了XFdrake，可是有的项目我不知道怎么配置，第一个是填Vendor，我的主板是inter945的，我就选了inter〉945，下面还有一个是3D什么的，不知道要不要选，然后就是要选择Xorg，那个我不知道选什么。随便选择一个，进入下一项，选择我的显示器分辩率，我的显示器是15吋宽屏的，于是选择1280*800，我在windows下就是这样选择的。最后又是Resolution，我也不知道应该怎样选，我随便挑个1280*768的，然后测试，还是说我配置的有问题，请问，具体应该怎么设置呢？
急盼解答，另外谢谢楼上的高手支招

显卡选 intel 945（暂时不选上 3D 加速），显示器选 Flat Panel 1280x800，分辨率选 1280x800，24bit 色。不用测试，保存设置，再 startx。因为我不是使用这种笔记本，所以不敢确定。

我已经按照斑竹的设置设置了，而且我也觉得确实是配置的问题，可是进入系统的时候又显示出了新的警告和错误

(ww)I810:No matching Device section for instance (BusID PCI:0:2:1) found
(EE)No devices detected

我又进入屏幕给出的网站http://wiki.x.org查看解决方法——

队以第一个警告，网站提示：
Many devices include multiple device IDs on the same slot. Multi-head Radeons, for example, will often show up as both 1:0.0 and 1:0.1. The second device is totally fake, it only exists so the multihead support on certain other OSes will work. You can safely ignore these kinds of warnings.

既然它说问题不大，可以忽略，我想就没关系了。

第二个错误，它的解释是

You get an error message like:

(EE) No devices detected.

Fatal server error:
no screens found
It is very likely that your xorg.conf file doesn't contain the correct driver(s) for the chipset(s) in your system or that your chipset isn't supported by any of the drivers.
You can check for the detected devices in the log file (in most cases /var/log/Xorg.0.log) by looking for lines like:
(--) PCI:*(1:0:0) Neomagic Corporation NM2200 [MagicGraph 256AV] rev 32, Mem @ 0xfd000000/24, 0xfe800000/22, 0xfec00000/20
In this example the active video device (the one with the *) is a Neomagic NM2200 video chip. In order to get this chipset to work you'd have to use the neomagic driver.
If you are using a distribution you should rerun its configuration tool. If there is no such tool, or if it keeps configuring your Xserver wrong you may want to try xorgcfg, the graphical tool shipped with Xorg. You can also let the server generate a config file: as root just run X -configure.
Please note: If you appear to use the correct driver and you still keep getting this message it is very likely that your chipset isn't supported (yet). In this case you may try the vesa driver or - if this doesn't work - the vga driver. However both are entirely unaccellerated.

它还是叫我rerun its configuration tool，可是我还是不知道应该怎么设置啊，可能还是有设置错的地方吧

望不吝赐教

/etc/X11/xorg.conf文件中的问题

那具体应该如何解决呢？