当前位置：首页 → 问答吧 → 请救帮助： klogd [1120] ERROR 4 （换 sysklogd-1.4.1 ，问题解决了）

请救帮助： klogd [1120] ERROR 4 （换 sysklogd-1.4.1 ，问题解决了）

时间：2007-09-24

来源：互联网

问题已解决，是 sysklog-1.5 的问题。

启动时，因为这个错误需要等待近七分钟。这是启动时屏幕上的信息：

代码:

r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RTL8101e at 0xffffc20010610000, 00:03:0d:69:8c:c8, IRQ 19 [ OK ]
Mounting root file system in read-only mode... [ OK ]
Checking file systems...
/dev/sda1: clean, 148650/1005888 files, 1059429/2008117 blocks [ OK ]
Remounting root file system in read-write mode...
EXT3 FS on sda1, internal journal [ OK ]
Recording existing mounts in /etc/mtab... [ OK ]
Mounting remaining file systems... [ OK ]
Activating all swap files/partitions... [ OK ]
Cleaning file systems: /tmp /var/lock /var/run [ OK ]
Creating files and directories... [ OK ]
Setting system clock... [ OK ]
Bringing up the loopback interface... [ OK ]
Setting hostname to CLFS... [ OK ]
INIT: Entering runlevel: 3
Starting system log daemon... [ OK ]
Starting kernel log daemon...
klogd[1120]: segfault at 0000000000000000 rip 00002b6c3068ccf7 rsp 00007fff7a693d40 error 4 [ FAIL ]
Bringing up the eth0 interface...
r8169: eth0: link down
Adding IPv4 address 192.168.1.200 to the eth0 interface... [ OK ]
Setting up default gateway... [ OK ]
Interface eth0 already configured with IP 192.168.1.200. [ WARN ]
Starting the Network Audio System Server...
Network Audio System Release 1.9 [ OK ]
Starting SSH Server... [ OK ]
Starting gpm... [ OK ]

CLFS login: r8169: eth0: link up
root
Password:

作者: tfkdmwmqtr 发布时间: 2007-09-24

这些是系统完成后第一次启动时的log :

root@CLFS:~# cat /root/log/lastlog
Q�Ftty1root@CLFS:~# cat /root/log/auth.log
Sep 22 15:46:13 CLFS login[1150]: invalid password for `root' on 'tty1'
Sep 22 15:46:25 CLFS login[1150]: ROOT LOGIN on 'tty1'
root@CLFS:~# cat /root/log/boot.log
Sep 22 15:39:32 CLFS bootlog: Starting system log daemon... [ OK ]
Sep 22 15:44:32 CLFS bootlog: Starting kernel log daemon... [ FAIL ]
Sep 22 15:44:32 CLFS bootlog: Bringing up the eth0 interface...
Sep 22 15:44:32 CLFS bootlog: Adding IPv4 address 192.168.1.100 to the eth0 interface... [ OK ]
Sep 22 15:44:32 CLFS bootlog: Setting up default gateway... [ OK ]
Sep 22 15:44:32 CLFS bootlog: Interface eth0 already configured with IP 192.168.1.100. [ WARN ]
root@CLFS:~# cat /root/log/daemon.log
root@CLFS:~# cat /root/log/kern.log
Sep 22 15:39:32 CLFS kernel: klogd 1.5.0, log source = /proc/kmsg started.
Sep 22 15:39:32 CLFS kernel: Cannot find map file.
Sep 22 15:39:32 CLFS kernel: No module symbols loaded - kernel modules not enabled.
root@CLFS:~# cat /root/log/klogd.pid
1091
root@CLFS:~# cat /root/log/log_list
/var/log/kern.log
/var/log/boot.log
/var/log/lastlog
/var/log/daemon.log
/var/log/sys.log
/var/log/mail.log
/var/log/auth.log
/var/log/user.log
/var/run/klogd.pid
/var/run/syslogd.pid
root@CLFS:~# cat /root/log/mail.log
root@CLFS:~# cat /root/log/sys.log
Sep 22 15:39:32 CLFS syslogd 1.5.0: restart.
Sep 22 15:39:32 CLFS bootlog: Starting system log daemon... [ OK ]
Sep 22 15:39:32 CLFS kernel: klogd 1.5.0, log source = /proc/kmsg started.
Sep 22 15:39:32 CLFS kernel: Cannot find map file.
Sep 22 15:39:32 CLFS kernel: No module symbols loaded - kernel modules not enabled.
Sep 22 15:44:32 CLFS bootlog: Starting kernel log daemon... [ FAIL ]
Sep 22 15:44:32 CLFS bootlog: Bringing up the eth0 interface...
Sep 22 15:44:32 CLFS bootlog: Adding IPv4 address 192.168.1.100 to the eth0 interface... [ OK ]
Sep 22 15:44:32 CLFS bootlog: Setting up default gateway... [ OK ]
Sep 22 15:44:32 CLFS bootlog: Interface eth0 already configured with IP 192.168.1.100. [ WARN ]
root@CLFS:~# cat /root/log/syslogd.pid
1083
root@CLFS:~# cat /root/log/user.log
root@CLFS:~#

作者: tfkdmwmqtr 发布时间: 2007-09-24

前几天好像有个兄弟的硬盘有问题也出现过什麽 segfault 什麽什麽 error，莫非。。。

作者: d00m3d 发布时间: 2007-09-24

引用:

作者: d00m3d

前几天好像有个兄弟的硬盘有问题也出现过什麽 segfault 什麽什麽 error，莫非。。。

非也，此乃新版 CLFS-svn 独有。
新笔记本和台式机看到同样的效果。
会不会是这个包的问题？ Sysklogd-1.5
待我换成 1.4.x 的看看可有问题。

作者: tfkdmwmqtr 发布时间: 2007-09-24

但愿如此了。

作者: d00m3d 发布时间: 2007-09-24

问题已解决，是 sysklogd-1.5 的问题。

在另一系统中 chroot 到新做的系统，删除 sysklogd-1.5 相应文件，安装 sysklogd-1.4.1后重启顺畅！
原先的竖琴开机声音播放到快结束的时候就停了，感觉十分郁闷。这次 KDE 启动后，听到了完整的音乐，很舒服。
那个，我的的安装过程，我会开始总结了。两个十分头疼的启动问题已经解决，这下可以安心的使用新做的系统了。

作者: tfkdmwmqtr 发布时间: 2007-09-25