HA无法启动，报tty的错

ERROR: The following tty devices are enabled in /etc/inittab
on the following cluster node(s):

Node Name                        Device         Identifier      Action
-------------------------------- ----------     ----------      -------
P550A                             /dev/tty0      tty0            respawn
P550B                            /dev/tty0      tty0            respawn

RSCT will be unable to start until these entries are removed or disabled
within /etc/inittab.
Please remove these entries, or change the action to 'off' then run
'init q' to stop the getty or terminal processes.

END CHECK
Check: FAILED

这是什么问题啊
/etc/inittab下有一条tty0:2:respawn:/usr/sbin/getty /dev/tty0
用rminit删掉 有没问题

errpt有报
3A30359F   0725191111 T S init           SOFTWARE PROGRAM ERROR
Detail Data
SOFTWARE ERROR CODE
Command is respawning too rapidly. Check for possible errors.
COMMAND
id: #tty0 "/usr/sbin/getty /dev/tty0"

==--
tty0是pci串口卡上的tty0       U7879.001.DQDYDTB-P1-C6-T1-L0  Asynchronous Terminal

看来你对系统都没什么基础了解，这样搞HA就是胡搞，没有意义。