AIX6.1+PowerHA6.1 标准版 clstat 问题！

OS:6100-06-05-1115
PowerHA6.1 标准版

又遇到clstat无法显示的错误！
/etc/snmpdv3.conf文件已经修改，
增加如下粗体内容：
#VACM_VIEW defaultView       internet                   - included -
VACM_VIEW defaultView        1.3.6.1.4.1.2.2.1.1.1.0    - included -
VACM_VIEW defaultView        1.3.6.1.4.1.2.6.191.1.6    - included -
VACM_VIEW defaultView     1.3.6.1.4.1.2.3.1.2.1.5    - included -

#stopsrc -s snmpd
#startsrc -s snmpd

>/usr/es/sbin/cluster/utilities/cldump

cldump: Waiting for the Cluster SMUX peer (clstrmgrES)
to stabilize.............
        name        List of names to show, none implies all.
>/usr/es/sbin/cluster/clstat -o
Failed retrieving cluster information.

There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.

Refer to the HACMP Administration Guide for more information.

>lssrc -s snmpd
Subsystem         Group            PID          Status
snmpd            tcpip            1900918      active
>lssrc -s clinfoES
Subsystem         Group            PID          Status
clinfoES         cluster          1900776      active

以前AIX6.1+PowerHA5.5 也遇到过，修改snmpdv3.conf 就可以，

这次Power6.1就不行了，

农哥好像也遇到过？农哥另外一台机器镜像过去的，
我两台机器都是单独装的！

系统都重启好几次了

>/usr/es/sbin/cluster/utilities/cldump

cldump: Waiting for the Cluster SMUX peer (clstrmgrES)
to stabilize.............
        name        List of names to show, none implies all.

好像和以前不大一样
cldump: Waiting for the Cluster SMUX peer (clstrmgrES)
to stabilize.............
Unable to communicate with the Cluster SMUX Peer Daemon

/usr/es/sbin/cluster/etc/clhosts这个文件增加两个节点了没有?

snmpd启动后，要等2分钟以上