关于IPMP设置问题，求教

最近在一批机器上安装IPMP，机器是富士通的M4000，M5000.M9000.发现一个问题。想请教各位同仁。
安装IPMP的时候，如果使用2个bge（机器自带）网卡，则无法实现漂移。使用一个bge和一个fjgi（外插）网卡，也不可以漂移。但是使用2个fjgi口的时候就可以实现漂移。
我使用的IPMP的配置脚本是这样的。

-bash-3.00# more /etc/hosts
127.0.0.1       localhost      
172.20.253.71   M9000-DB-1 loghost
172.20.253.69   M9000-DB-1-test1
172.20.253.70   M9000-DB-1-test2


-bash-3.00# more /etc/hostname.fjgi1
M9000-DB-1 netmask + broadcast + group IPMP up addif M9000-DB-1-test1 deprecated -failover netmask + broadcast + up

-bash-3.00# more /etc/hostname.fjgi7
M9000-DB-1-test2 netmask + broadcast + group IPMP deprecated -failover standby up



不能漂移的时候的ifconfig -a如下：-bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
bge01: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 172.20.253.71 netmask ffffffe0 broadcast 172.20.253.95
        groupname production
        ether 0:0:77:b2:78:ef
bge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
        inet 172.20.253.69 netmask ffffffe0 broadcast 172.20.253.95
fjgi7: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED,STANDBY> mtu 1500 index 3
        inet 172.20.253.70 netmask ffffffe0 broadcast 172.20.253.95
        groupname production
        ether 0:0:77:b2:79:ff

能漂移的时候的ifconfig -a如下：-bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
fjgi1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 172.20.253.71 netmask ffffffe0 broadcast 172.20.253.95
        groupname production
        ether 0:0:77:b2:78:ef
fjgi1:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
        inet 172.20.253.69 netmask ffffffe0 broadcast 172.20.253.95
fjgi7: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 3
        inet 172.20.253.70 netmask ffffffe0 broadcast 172.20.253.95
        groupname production
        ether 0:0:77:b2:79:ff


2个之间唯一的区别就是fjgi7口的状态，一个是failed，一个是inactive。请问这个是什么原因？

别用probe的ipmp了，你改成link-base的试试简单实用

probe问题太多，还是link-base问题少点