当前位置：首页 → 问答吧 → Static route for two different subnets

Static route for two different subnets

时间：2014-04-15

来源：互联网

Hi All,

I am confusing on how to make computers can access each others between two different subnets. Could anybody advise me what routing rules should be added into my two routers? Below are the IP's details. Please help. Thanks a million~

Router A:

--WAN Settings--
IP: 203.187.106.138
Subnet: 255.255.255.224
Gateway: 203.187.106.148
--LAN Settings--
IP: 10.20.30.252
Subnet Mask: 255.255.255.0

Router B:

--WAN Settings--
IP: 203.187.106.147
Subnet: 255.255.255.224
Gateway: 203.187.106.148
--LAN Settings--
IP: 10.20.40.249
Subnet Mask: 255.255.255.0

作者: tang_kaicheung 发布时间: 2014-04-15

What brand of router?

作者: hkjusty 发布时间: 2014-04-15

引用:原帖由 tang_kaicheung 於 2014-4-4 09:31 AM 发表
Hi All,

I am confusing on how to make computers can access each others between two different subnets. Could anybody advise me what routing rules should be added into my two routers? Below are the ...

How you connect 2 router?

作者: amx882 发布时间: 2014-04-15

L3 routing / RIP ?

作者: hkjusty 发布时间: 2014-04-15

There are two different brand of routers, they are Buffalo and D-link.
And the connections are like this:
* ISP's router distributing the 203.x.x.x IP addresses
* For WAN connections (Physically) my two routers plugged to ISP's router and containing two different 203.x.x.x IP. Both gateway is set to 203.187.106.148
* For LAN connections (Physically too) there are two group of computers and they connected to these two routers

Since I don't know how to post picture here, hope you all can imagine what those connections look like with the above description.

Thank you all!

作者: tang_kaicheung 发布时间: 2014-04-15

引用:原帖由 tang_kaicheung 於 2014-4-8 09:27 AM 发表
There are two different brand of routers, they are Buffalo and D-link.
And the connections are like this:
* ISP's router distributing the 203.x.x.x IP addresses
* For WAN connections (Physically) m ...

if possible you can build vpn to connect it

作者: amx882 发布时间: 2014-04-15

引用:原帖由 tang_kaicheung 於 8/4/2014 09:27 发表
There are two different brand of routers, they are Buffalo and D-link.
And the connections are like this:
* ISP's router distributing the 203.x.x.x IP addresses
* For WAN connections (Physically) m ...

First of all, you should mention the ISP onloan router in first post. because entire situation changed
However, you cant make both network "rout-able" unless you are able to modify the settings in ISP router..

作者: rol801 发布时间: 2014-04-15

你要换一只SUPPORT RIP嘅ROUTER或可以将依架做紧个两只ROUTER SET同一个SUBNET，再做STATIC ROUTE。

作者: hkjusty 发布时间: 2014-04-15

引用:原帖由 hkjusty 於 9/4/2014 02:19 发表
你要换一只SUPPORT RIP嘅ROUTER或可以将依架做紧个两只ROUTER SET同一个SUBNET，再做STATIC ROUTE。

同一个subnet点route?

作者: rol801 发布时间: 2014-04-15